ProConcrete

Introduced a New Button in Ties Tab Of Column Reinforcing Tool

Added a new button "Changes the location of the End Condition" which allows to change the location of End condition of ties to the next location upon click.

Radial Option Added in Bar Range Attributes Dialog

The radial option is added in Bar Range Attributes dialog.

Lapping Supported For Radial Rebar Segments

Lapping is now supported for radial rebar segments.

New Tool Added To PC Toggle

A new tool is added to PC Toggle to highlight owner concrete and rebars together. Here, rebar needs to be selected first, and owner concrete automatically gets selected.

Save Button Added in Pad Footing Dialog

A new "Save" button is added in the Pad Footing dialog box to place recurring footings with the same setting without exiting the dialog.

Footing Reinforcing Clone Tool

Footing Reinforcing clone tool now works in continuation. Footing rebar can be cloned multiple times in one click.

Rebar End Condition Modification Tool

Rebar End Condition modification tool performance is improved.

Bar Modification Tool Plates

Bar modification tool plates are combined with 2D Rebar dialogs.

Dowel Bars Identification

During the bar marking process, dowel bars are now identified as type T1.

Support Added To Place Opening And Perimeter Trimmer Reinforcement For MS Solids

Support is added to place opening and perimeter trimmer reinforcement for MS solids.

Automatic Lap Functionality Added

Automatic Lap functionality is added for Spiral Ties of Circular Columns.

Closed Bottom Transverse Rebar Are Treated As Alternate Bars

Closed Bottom Transverse Rebar in the continuous footing reinforcing are treated as alternate bars. All other types of rebars will be treated as the main bar.

Support For Whole Bar And Long Bar Fudge Are Added

Introduced Whole Bar Fudge along with Single bar. Also, Long Bars can also be Fudged by either choosing a Single Bar or a set of Bars.

Enhanced Level Defaults

In Level Defaults, a new option "Inherit properties from 3D rebar level" is introduced, which will allow inheriting properties from 3D level to 2D level. Currently, three properties can be inherited i.e., Color, Weight and Line style, which is applicable to 2D rebar only.